The NEW Atmega 128 with an 18.000 Mhz XTAL is one of the most amazing and exciting products to come out for Dish Network and Bell Express Vu  in years! The 18.000 Mhz XTAL is ideal to communicate with the Dish Network and Bell Express Vu receivers. This unit is designed and manufactured by the famous Atmega EFA Group. This wafer will allow you open up all channels without the use of an access card. You are reading correctly!! This device replaces the Dish Network or Bell Express Vu access card, and then you can have all channels wide open including pay-per-view, sports packages, and the best adult channels available in the world. The card is flash upgradeable in the future for those people who want to use their currently subscribed Dish Network or Bell Express Vu card. The Atmega EFA 128 Wafer can be re-flashed as needed for new and updated programming.

This is the only card that can be upgraded to married sub in the future. All other cards will not be compatible with married sub because the standard and the pin-out will be chosen by coders working with EFA, so the other dealers have no idea yet about the married sub.

This ATMEGA128 comes with UNIVERSAL 16 PINS Programmer with 9VDC Input and voltage regulator for extra power required by some ATMEGA128 cards. Some ATMEGA128 IC is locked up and you need extra voltage to unlock, the Universal 16 Pins Programmer is perfect to Unloop or Unlock Atmega IC. Click on the picture or more INFO button for more enlarge pictures. 9VDC Power Adapter & Cable is not included.

*Please note that this unit does NOT comes with serial cable and external power adapter. You can also use same Power Adapter used for T911 Loader or T6 WAVE II or T6 WAVE III. Or you can simply order a power adapter from Electronics Supply Store, FRY's Electronics, Wal-Mart or Radio Shack (but for power adapter, you can use either the 9VDC 300mAmp to 500mAmp with CENTER TIP OR PIN is POSITIVE)*.  

Box keys are required for the Atmega 128 cam-less testing. If you do not have your box keys, then you need to extract them from your Dish Network receiver with our Universal J-Tag.
Troubleshooting for Blank Video & Audio: 

Use these files to factory restore your ATmega128-EFA to the way it was when you bought it. This is for people that are having problems programming their ATmegas due to corruption.

To use this, just extract the .zips contents then write the EEP file first and then the hex file second with Jeepers.

The EEP file is the EEPROM and the HEX file is the Flash.
To do this, choose ATMEL > ATMEGA128 > WRITE EEPROM, and then choose the ATmega128.eep file from the .zip then,
choose ATMEL > ATMEGA128 > WRITE FLASH, and then choose the ATmega128.hex file from the .zip.
After you write both files to your mega, it will be restored to factory settings and the memory will be completely virgin.
This should help those that are having black screen issues and serious programming errors with their Atmegas.

ATMEGA 128 Factory Restore.zip

If you Flash your ATMEGA and after inserting into 301-310 model receiver. The symptoms is that you will get all guide but Black Video or no Audio or you will get the 005 error (kind of like putting the wrong boxkey or ird number). Sometimes it will even get stuck a t" Acquiring Satellite Signal". Then please perform following procedures. You will need two pins and jumpers or one staples pin to make J1 Jumper complete. Some model of receiver you can use this as jump less ATMEGA128, no changes or jumper required. Short JP1 then program the cards in jeepers in CLK External mode (use clock signal from the IRD)

FREE GIFT!!

Other Price: $59 Our Price: $40